English |
9
Bosch Power Tools
1 609 92A 39G | (14.10.16)
Operation
Initial Operation
Inserting the battery
Insert the charged battery
5
into the battery port until it can be felt to engage and is
seated flush.
Switching On and Off
To
start
the cordless worklight, press the On/Off switch
2
.
To
switch off
the cordless worklight, press the On/Off switch
2
again.
To save energy, only switch the cordless worklight on when using it.
Working Advice
Utility Hook (see figure A)
You can use the utility hook
3
to attach the cordless worklight to an object.
Aligning the Cordless Worklight (see figure B)
The cordless worklight can be used standing up, hanging or lying down. Its hexagonal
shape enables the light to be aligned according to its use.
Maintenance and Service
Maintenance and Cleaning
When the battery is no longer operative, please refer to an authorised after-sales ser-
vice agent for Bosch power tools.
The cordless worklight is maintenance-free and contains no components that must be
replaced or maintained.
The light source cannot be replaced. If the light source is defective, the entire cord-
less worklight has to be replaced.
To avoid damage, clean the plastic lens of the cordless worklight only with a dry, soft
cloth. Do not use cleaning agents or solvent.
After-sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance and re-
pair of your product as well as spare parts. Exploded views and information on spare
parts can also be found under:
www.bosch-pt.com
OBJ_BUCH-2989-001.book Page 9 Friday, October 14, 2016 11:46 AM