background image

en | 

3

7 620 310 073 | 09.2020

Robert Bosch GmbH

en

Important information | Switching on/off | Settings | Technical data

Installation notes

Important note:

The installation of the monitor requires the 
adapter cable 7 620 280 125 (to be obtained 
separately).

Important note:

The monitor may only be attached to one of 
these holders:

 

f

Fixed holder for roof mount  
(7 620 340 031)

 

f

Fixed holder for wall mount  
(7 620 340 033)

 

f

Swivel holder (7 620 340 032)

Please carefully observe the installation 
instructions of the respective holder.

Note:

Please also observe the information given in 
the device drawings at the end of this docu-
ment.

Please observe the following installation notes:

 

f

Do not exert external force onto the frame and 
visible surface of the LCD.

 

f

Do not exceed the maximum length of the device‘s 
supply cables. 

 

f

The device‘s supply cable must provide a minimum 
cross sectional area of 1.5 mm

2

.

 

f

Observe the minimum bending radius of the 
device‘s supply cables.

 

f

Ensure that the device‘s supply cables are pro-
tected against sharp edges.

 

f

Mount the device or its holder respectively only to a 
stiff surface with enough stability for the system.

 

f

Only use suitable screws and washers for mounting 
the device to the holder.

 

f

Observe the required thread reach and torque.

 

f

Air convection and ventilation must be ensured. Do 
not cover the ventilation holes.

Switching on/off

The device is automatically switched on or off by the 
Coach Infotainment system of your Vehicle.

Settings

The monitor provides setting options (via Center 
CM-C 19) for:

 

f

Brightness

 

f

Contrast

 

f

Gamma correction

 

f

Aspect ratio (3 modes for autoscaling of 16:9 and 
4:3 picture sources)

 

f

Reset to factory settings

Note:

Please refer to the user manual of the Center 
CM-C 19 for information about making settings 
for the connected monitor.

Technical data

Power Supply 

24 V (17 V – 36 V)

Current consumption

In operation 

5 A

Max. current 

< 10 A

Standby current 

max. 100 μA

Diagonal display size 

21“ ±1.5“

Resolution 

1920 x 1080 pixels

Contrast ratio 

1000 : 1

Luminance 

Min. 250 cd/m2

Screen format 

16:10, 16:9

Viewing angle 

±80° in all directions

Backlight  

LED

Flash memory 

2 Gbits

Operating frequency 

60 Hz

Network interface 

OABR | 2 ports | speed rate:  
100 Mbits/s full duplex

Operating temperature  -25 °C to +65 °C
Storage temperature 

-25 °C to +75 °C

Dimensions (L x W x H)  537 x 329 x 51 mm
Weight 

 

Approx. 3.5 kg

Certification 

CE, UN ECE R10,
UN ECE R118

Subject to changes!

Reviews: