SECURING TRACKS
T o a v o i d t h e r i s k o f
injury and/or property
damage, only use the track clamps to
secure the track.
Once the track has been placed in the
desired position, insert a track clamp
50
in
from each end of the track, then tighten
the clamps against the workpiece (Fig. 7).
PROTECTIVE END CAPS
These caps help to protect the ends of the
t r a c k s f r o m d a m a g e , s u c h a s w h e n
dropped on their ends. The left
44
and
right
45
caps are NOT interchangeable. If
o n e o r b o t h o f t h e e n d c a p s b e c o m e
damaged, they should simply be replaced
(Fig. 8).
CONNECTING MULTIPLE TRACKS
A.
Pull out the end caps
44
and
45
from
facing ends of the tracks
4 0
to be
connected. Store the end caps in a safe
place (Fig. 8).
B.
Insert the connector
41
into one of the
tracks
4 0
as shown and then slide
another track onto the other end of the
connector (Fig. 9).
C.
Make sure that the tracks have no gap in
between them. Move the connector
41
so that the center mark “⇐|⇒” is
positioned at the joint line. Turn all four
locks with a screw driver or a coin to
secure the connection (Fig. 10).
Track Assembly
50
Fig. 7
Fig. 8
Fig. 9
Fig. 10
44
45
40
40
41
17
2610055543.qxp_GKT18V-20GC 5/26/20 4:37 PM Page 17
