background image

English–4

1 619 929 622  •  (03.04) T

Before any work on the machine itself, pull the
mains plug.

For safe and efficient working, always keep the ma-
chine and the ventilation slots clean.

Clean the tool holder daily.

Replacing the Dust Protection Cap

Damaged dust protection caps should be replaced as
soon as possible since dust that enters the tool holder
can cause malfunctions.

It is recommended that this be performed by
customer service.

WARNING

Important instructions for connecting a new 3-
pin plug to the 2-wire cable.

The wires in the cable are coloured according to the
following code:

Do 

not

 connect the blue or brown wire to the earth ter-

minal of the plug.

Important:

  If the plug on the cable of this machine

must be replaced, dispose of the old plug to prevent
misuse.

If the machine should fail despite the care taken in
manufacture and testing, repair should be carried out
by an authorised customer services agent for Bosch
power tools.

For all correspondence and spare parts orders, always
include the 10-digit order number of the machine.

Recycle raw materials instead of disposing as 
waste.

The machine, accessories and packaging should be
submitted for environment-friendly recycling.

These instructions are printed on recycled paper man-
ufactured without chlorine.

The plastic components are labelled for categorised
recycling.

Great Britain

Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ

 Service . . . . . . . . . . . . . .  +44 (0) 18 95/83 87 82

 Advice line. . . . . . . . . . . .  +44 (0) 18 95/83 87 91

Fax  . . . . . . . . . . . . . . . . . . .  +44 (0) 18 95/83 87 89

Ireland

Beaver Distribution Ltd.
Greenhills Road
Tallaght-Dublin 24

 Service . . . . . . . . . . . . . . . .  + 353 (0)1/414 9400

Fax  . . . . . . . . . . . . . . . . . . . . .  + 353 (0)1/459 8030

Australia

Robert Bosch Australia L.t.d.
RBAU/SBT2
1555 Centre Road
P.O. Box 66 Clayton
3168 Clayton/Victoria

 . . . . . . . . . . . . . . . . . . . . .  +61 (0)1/800 804 777

Fax  . . . . . . . . . . . . . . . . . . . .  +61 (0)1/800 819 520
www.bosch.com.au
E-Mail: [email protected]

New Zealand

Robert Bosch Limited
14-16 Constellation Drive
Mairangi Bay
Auckland
New Zealand

 . . . . . . . . . . . . . . . . . . . . . . .  +64 (0)9/47 86 158

Fax  . . . . . . . . . . . . . . . . . . . . . .  +64 (0)9/47 82 914

We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standardization documents: 
EN 50 144 according to the provisions of the direc-
tives 89/336/EEC, 98/37/EC.

Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge

Specification subject to alteration without notice

Maintenance and Cleaning

Environmental Protection

Strain relief

Live

 = brown

Neutral

 = blue

To be fitted
by qualified

professionals only

Service and Customer Advice

Declaration of Conformity

Dr. Egbert Schneider
Senior Vice President 
Engineering

Dr. Eckerhard Strötgen
Head of Product 
Certification

Summary of Contents for GBH 2 POWER PLUS












Reviews: