12
| English
1 609 929 X19 | (13.1.11)
Bosch Power Tools
Intended Use
The machine is intended for collection, vacuum-
ing, conveying and separation of non-flammable
dry dusts that correspond with the general ex-
position limit value of > 1 mg/m
3
, such as dusts
of mineral materials with aluminium hydroxide,
graphite dusts, aluminium dusts, paper dusts,
soot dusts, powder paint dusts, polyurethane
dusts, GFRP dusts based on epoxy resin (see
manufacturer’s data sheet on safety), CFP dusts
based on epoxy resin (see manufacturer’s data
sheet on safety), varnish dusts without carcino-
genic components, wood dusts and non-flam-
mable liquids and water-air mixtures. The vacu-
um cleaner is dust-technically checked and
corresponds with dust category L.
The vacuum cleaner has a blower function, e. g.
for drying surfaces.
The vacuum cleaner has a socket outlet with re-
mote automatic switching for connection of a
power tool with extraction function.
It is suitable for the increased demands of in-
dustrial usage, as required in trades, industry
and workshops.
The vacuum cleaner may generally not be used
in rooms where the danger of an explosion ex-
ists.
Technical Data
The technical data of the machine are listed in
the Table on page 166.
The values given are valid for a nominal voltage
[U] of 230 V. For different voltages and models
for specific countries, these values can vary.
Please observe the article number on the type
plate of your vacuum cleaner. The trade names
of the individual vacuum cleaners may vary.
Declaration of Conformity
We declare under our sole responsibility that
the product described under “Technical data” is
in conformity with the following standards or
standardization documents: EN 60335 and the
directives 2006/42/EC, 2004/108/EC including
their amendments.
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
09.12.2010
Noise Information
The measured values of the machine are listed
in the table on page 166.
Measured values determined according to
EN 60704.
Mounting and Operation
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
Action
Figure
Page
Removing accessories
1
167
Mounting the hose holder
2
167
Inserting a dust bag
3
168
Inserting a disposal bag
4
169
Disposing of the dust bag
5
169
Mounting the hose
6
170
Transport position
7
171
OBJ_BUCH-1321-001.book Page 12 Thursday, January 13, 2011 2:35 PM
