20
| English
Problem
Possible Cause
Corrective Measure
Cable not (properly) connected
Ensure that the plug is fully inserted into the con-
nection on the control box and the protective col-
lar is in place
Battery discharged
Recharge battery
Pump/water frozen
Remove pump and wait until ice has completely
melted
Pump running but no
or limited working
pressure/pulsating
pressure
Water filter clogged up
Remove filter and clean
Insufficient water
Check the water level and ensure that the pump is
fully submerged
Air in the pump/hose
Remove any spray attachment and run the pump
with only hose attached until water flows
smoothly
Auto stop connections fitted
Exchange connectors for non autostop type
Hose Blockage
Check hose for kinks and blockages
Water leaking from
hose after pump use
Anti-siphon connector not fitted
Fit the anti-siphoning connector provided
Anti-siphon connector not properly positioned
Reposition the anti-siphon connector so that it is
positioned above the water level within the tank
Flashing red battery
charge indicator.
No charging procedure
possible
Battery contacts contaminated
Clean the battery contacts(e.g. by inserting and
removing the battery several times) or replace
the battery
Battery defective
Replace the battery
Battery charge indic-
ator does not light up
on charge
Mains plug of battery charger not plugged in
(properly)
Insert mains plug (fully) into the socket outlet
Socket outlet, mains cable or battery charger de-
fective
Check the mains voltage; have the battery char-
ger checked by an authorised after-sales service
agent for Bosch power tools
Maintenance, Cleaning and Storage
Maintenance
Note:
To ensure long and reliable service, carry out the fol-
lowing maintenance regularly.
u
Repairs may only be carried out by authorised Bosch Ser-
vice Centres.
Check that covers and guards are undamaged and correctly
fitted. Carry out necessary maintenance or repairs before
using.
Regularly check for obvious defects such as loose fixings,
and worn or damaged components.
Storage in Winter (see figure N)
Switch off the pump and remove the battery from the bat-
tery control unit. Pull the pump with the connecting hose out
of the tank. Disconnect the connecting cable and the con-
necting hose.
Drain water from the pump.
Clean the exterior of the pump using a soft brush and a cloth.
Do not use solvents or polishes. Remove all dirt/debris, in
particular clean the filter.
Wrap the cable around the pump and secure it to the cable
clamps. Remove the battery control unit from the wall/water
tank attachment.
Store in a frost-free area.
Ensure that the cable is not pinched/wedged when storing.
Do not bend/kink the connection hose.
Battery Maintenance
Use the following procedures to enable optimum usage of
the battery:
– Protect the battery against moisture and water.
– Store the machine and battery only within a temperature
range between –20 °C and 50 °C . As an example, do not
leave the battery in the car in summer.
– It is recommended that the battery is not stored within
the product but stored separately.
– Do not leave the battery in the product in direct sunlight.
– The ideal storage condition for the battery is 5 °C.
– Occasionally clean the venting slots of the battery using a
soft, clean and dry brush.
A significantly reduced working period after charging indic-
ates that the battery is used and must be replaced.
After-sales Service and Application
Service
www.bosch-garden.com
F 016 L81 984 | (07.11.2019)
Bosch Power Tools
Summary of Contents for GardenPump 18
Page 302: ...302 5 10 15 5 10 15 B C 10 9 6 8 9 F 016 L81 984 07 11 2019 Bosch Power Tools ...
Page 304: ...304 5 10 15 50 mm G 19 14 21 F 13 12 F 016 L81 984 07 11 2019 Bosch Power Tools ...
Page 307: ... 307 5 10 15 5 10 15 5 10 15 L M 7 6 17 18 22 N Bosch Power Tools F 016 L81 984 07 11 2019 ...
Page 308: ...308 F 016 800 599 F 016 800 598 O F 016 L81 984 07 11 2019 Bosch Power Tools ...