ntrusion
| Getting
Started | G450 Home Control Gateway
are Trademarks of Robert Bosch GmbH, Germany
are Trademarks of Robert Bosch GmbH, Germany
Getting Started
This Home Control Gateway is a controller that supports home automation devices within a Home
Control ecosystem. Home automation devices are added to the network, and provide users simple home
control from mobile devices (smart phones, tablets) and web browsers. The gateway additionally
communicates with, and controls, Bosch alarm panels using the Ethernet port connection.
Activation Process
The following sequence of events must take place prior to the activation and daily use of the Home
Control Gateway. Refer to the list below for task assignments and ownership.
1.
Dealer:
The Dealer must register for services at:
https://installerservices.boschsecurity.com
2.
Bosch:
The Bosch representative creates an Administrative Portal (AP) account and unlocks
the dealer’s account (this enables the dealer to order the controller). An AP account email
notification is sent to the dealer.
3.
Dealer
: The Dealer orders the Home Control Gateway. The Dealer registers the controller
and activates the service in Administrative Portal upon arrival of the controller.
4.
Dealer
: The Dealer installs and configures the controller and enables a Bosch Alarm Panel to
communicate with the controller.
5.
End-User
: The End-User customizes and uses the Home Control ecosystem. Additional
device may be added at this time.
G450 Overview
The following descriptions refer to the buttons and LEDs on your gateway. Although these buttons are
not
the primary method for adding or removing devices, please familiarize yourself with the Home Control
Gateway.
Refer to the figure below for a system overview.
