60
en | Recording
Camera Browser Interface
AM18-Q0605 | v5.0 | 2011.07
Software manual
Bosch Security Systems
11.2.1
Recording track selection
Standard and alarm recording can be defined for the two
recording tracks. You must first select the track before setting
up the standard and alarm recording parameters.
1.
Click the
Recording 1
entry in the list.
2.
Set up the standard and alarm recording parameters for
track 1 as described below.
3.
Click the
Recording 2
entry in the list.
4.
Set up the standard and alarm recording parameters for
track 2 as described below.
11.2.2
Standard recording
Select the mode for standard recordings:
–
Continuous
: the recording proceeds continuously. If the
maximum recording capacity is reached, older recordings
are overwritten automatically.
–
Pre-alarm
: recording takes place in the pre-alarm time,
during the alarm and during the post-alarm time only.
–
Off
: no automatic recording takes place.
Stream
Select the stream to be used for standard recordings:
–
Stream 1
–
Stream 2
–
I-frames only
11.2.3
Alarm recording
Select a period for the
Pre-alarm time
from the list box.
Select a period for the
Post-alarm time
from the list box.
Alarm stream
Select the stream to be used for alarm recordings:
–
Stream 1
–
Stream 2
–
I-frames only
