Bosch FPC-500, Operation Manual

Page: 31 / 40

Conventional fire panel Troubleshooting | en 31
Bosch Sicherheitssysteme GmbH 2019.07 | 5.1 | F.01U.172.982
Notice!
If you have selected the incorrect language, you can select the
language again when restarting by using a cold start
(disconnect power from system).
5 Troubleshooting
"Fault" LED lit
Check the fault message memory
Perform a system reset. If you cannot resolve the fault, please
contact your specialist.
"System fault" LED lit
The system is or was not working correctly. In the event of a
system fault, the system performs an automatic reset. The fault
display is retained for safety reasons.
Perform a reset. If this does not resolve the fault, please contact
your specialist immediately.
"Ground fault" LED lit
There is a fault in the cabling (one line in the panel is connected
to earth). Perform a system reset. If you cannot resolve the
fault, please contact your specialist immediately.
"Power supply fault" LED lit
There is a fault with the power supply (mains or battery).
Perform a system reset. If you cannot resolve the fault, please
contact your specialist immediately.
"Notification appliance fault/disabled" LED flashing
There is a fault with the notification appliances. Perform a
system reset. If you cannot resolve the fault, please contact your
specialist immediately.
6 Maintenance
Keep a log book that includes the following data as a minimum:
–
Information on the monitored object
– Contact details of the maintenance company
– Events