- 6 -
2. INPUT POWER / VIDEO OUTPUT CONNECTIONS
The camera unit is pre-connected with an electrically
isolated power boards for 24VAC or 12VDC operation
with no wiring change or wiring polarity.
See Figure 2-1
for wiring details.
Note:
Input voltage is 10.5VDC to 40VDC for DC input.
The AC input range is 12VAC to 28VAC.
NOTE: Section 3 explains the camera’s mounting
procedure. It would be advantageous to the installer if
the power and video wires from their remote source
could be routed into the electrical box at this time. This
would make the connections to the camera easier
during the mounting process.
FIGURE 2-1
12VDC or 24VAC
Electrically Isolated
Board
Power
IN
Power
OUT
Summary of Contents for EX7
Page 22: ... 16 7 Mounting Hole Diagram ...
