Bosch EX40, Installation Instructions Manual

Page: 16 / 36

10
Step 3.2 - For
side wiring
entry, feed the
power and video cables through a
½” NPT electrical conduit and
connect them as per
Figure 3-1
on
page 11. Tighten the conduit into
the side of the base. Seal the wiring
conduit with silicone to prevent
moisture penetration.
Step 3.3 - For
bottom wiring
entry, feed the
wires through the hole in the base
and connect them as per
Figure 3-2
on page 12. Close the side hole with
the supplied ½” NPT plug.
Step 3.4 - Mount the camera base. A mounting
hole template has been provided on
page 25 for this procedure.
Step 3.5 - Seal all holes in the neoprene pad
and around the ½” NPT plug with
silicone to prevent moisture
penetration.