10
expected conditions of vibration and
temperature.
•
Secure all cabling.
•
Installations on drywall must use #8 screws
and #8 drywall nylon plugs or a superior
connection.
The camera’s mounting holes are located on the
left and right side of the housing.
Refer to
Figure 3-1
on page 11.
Depending on the type of mounting surface
(brick, wood, etc.), it may be necessary to pre-
drill these holes for the mounting screws. It is
recommended that these holes be marked using
the housing as a drill template and then drilled
separately. This way no burrs or debris will fall
into the housing.
Ensure the power and video cables are not
crimped or stressed after the camera has been
mounted.
Summary of Contents for EX36N
