54
9.2.4
Entering the date/time
Sequence
Keypad entry
Exhaust-gas analyzer
Feedback
1.
D
Receives and sends back
D
2.
CR
Receives and starts input procedure
Day:
by transmitting "TAG"
3.
1(2) digits, CR
Receives and stores both digits as
MONTH:
DAY in the clock element.
Transmits "MONTH"
4.
1(2) digits, CR
Receives and stroes both digits as
YEAR:
MONTH in the clock element.
Transmits "YEAR"
5.
1(2) digits, CR
Receives and stores both digits as
Hour:
YEAR in the clock element.
Transmits "HOUR"
6.
1(2) digits, CR
Receives and stores both digits as
MINUTE:
HOUR in the clock element.
Transmits "MINUTE"
7.
1(2) digits, CR
Receives and stores both digits as MINUTE
in the clock element. End of input
of DATUM/UHRZEIT
i
The device monitors the plausibility of the entry. It interrupts an obviously incorrect entry (e.g. Date: 33. Month: 13 etc.)
with a renewed prompt (e.g. "*Month:") to enter the date/time again.
8.
CR
End of input
i
If you are only changing individual values, you do not have to enter digits for unchanged values.
Summary of Contents for ETT 008.31
