manualshive.com logo in svg

Bosch EDC17C46, Manual

Share
Download
Bosch EDC17C46 Manual Download Page 3

Manual for using EDC17C46 Bosch ECU probe with MPPS – Page 3.

The pads marked in yellow have to make contact with the probe.

Technical alterations reserved!

Copyright by 

www.chiptuningshop.co.uk

This product should be operated by competent personnel only. Chiptuningshop Ltd do not accept any responsibility

for damages, direct or consequential caused by improper handling.

Summary of Contents for EDC17C46

Page 1: ...OFF E Ignition selection switch ON The ignition pin of the ECU is supplied with a constant 12V power supply In conjunction with boot resistors switched OFF use this mode for reading of password on TP8 10 also can be used for DS Check and general diagnostic requests etc K Line The ignition pin of the ECU is connected directly to the K Line of the flash tool The flash tool will power the ignition pi...

Page 2: ...he ECU until the power switch B is turned on Adjust the ECU on the frame and move the retainer carefully towards the ECU Ensure that all the pins are in their designated position A diagram showing the location of the connections can be found on page 3 It is very important that the retainer is free from backlash and moves smoothly 3 Reading password This step is only necessary for TP8 Lift up the B...

Page 3: ...ow have to make contact with the probe Technical alterations reserved Copyright by www chiptuningshop co uk This product should be operated by competent personnel only Chiptuningshop Ltd do not accept any responsibility for damages direct or consequential caused by improper handling ...

Reviews:

No comments

Brands by name

Popular brands

Load more brands