Bosch EasyGrassCut 18, Original Instructions Manual

Page: 26 / 464

26 | English
Noise/Vibration Information
3 600 HC1 A.. 3 600 HC1 C..
Noise emission values determined according to EN 50636-2-91 .
Typically the A-weighted noise levels of the product are:
– Sound pressure level dB(A) 72 74
– Uncertainty K dB = 2.5 = 2.5
– Sound power level dB(A) 82 85
– Uncertainty K dB = 1.0 = 1.0
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 50636-2-91
– Vibration emission value a
h
m/s
2
< 2.5 < 2.5
– Uncertainty K m/s
2
= 1.5 = 1.5
Mounting and Operation
Action Figure Page
Product features A 446
Delivery scope B 447
Removing the transport safety C 447
Connecting the shaft D 448
Adjusting the handle E 448
Mounting the protection guard F 449
Battery charging and inserting G 450
Switching On and Off H 450
Switching from lawn trimming/
edge cutting I 451
Removing the line spool J 452
Winding line on spool K 452
Mounting the line spool L 453
Line feeding
M
453
Maintenance, Cleaning and Stor-
age N 454
Accessories O 455
Assembly
u
Caution: Switch the garden tool off and pull the mains
plug before performing any maintenance.
Connect shaft (see figures C and D)
Note: A connected shaft can no longer be dismounted.
Remove the transport safety (9) .
Connect the individual parts of the shaft until they can be
heard to engage.
Mounting and adjusting the handle (see figure E)
The handle (1) can be set to different positions. To change
the adjustment, press buttons (7) and move the handle to
the desired position. Release the buttons (7) again so that
the handle can engage.
Mounting the protection guard (see figure F)
Before mounting the protective guard, pull the plant-protec-
tion frame from the delivery position to the storage position.
Position the protection guard
(8) on the trimmer head and
fasten it with the provided screw.
Do not disassemble guard once connected.
Then, pull the plant-protection frame to the working posi-
tion.
Switching on
u
Caution: Switch garden tool off and remove battery
from machine before adjusting or cleaning.
u
The cutting line continues to rotate for a few seconds
after the trimmer is switched off. Allow the motor/cut-
ting line to stop rotating before switching on again.
u
Do not briefly switch off and on again several times in
a row.
u
Only use Bosch approved cutting elements. Cutting
performance will vary with different cutting elements.
Charging the Battery
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
and 35 °C. In this manner, a high battery service life is
achieved.
Note: The battery is supplied partially charged. To ensure
full battery capacity, completely charge the battery in the
battery charger before using for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not cause damage to the battery.
The “Electronic Cell Protection (ECP)” protects the lithium-
ion battery against deep discharging. When the battery is
empty, the product is switched off by means of a protective
circuit: The product no longer operates.
F 016 L94 030 | (04.06.2020) Bosch Power Tools