Bosch EasyDrill 1200, Original Instructions Manual

Page: 15 / 208

English | 15
Technical Data
Cordless drill/driver EasyDrill 1200 EasyImpact 1200
Article number 3 603 JD3 0.. 3 603 JD3 1..
Rated voltage V= 12 12
No-load speed
A)
– 1st gear min
-1
0–400 0–400
– 2nd gear min
-1
0–1500 0–1500
Impact rate
A)
min
-1
– 0–22500
Max. torque, hard/soft screwdriving application according to
ISO 5393
A)
Nm 30/18 30/18
Chuck capacity mm 0.8–10 0.8–10
Weight according to EPTA-Procedure 01:2014
A)
kg 1.0 1.1
Recommended ambient temperature during charging °C 0 to +35 0 to +35
Permitted ambient temperature during operation
B)
and during
storage
°C –20 to +50 –20 to +50
Recommended batteries PBA 12V... PBA 12V...
Recommended chargers GAL 12... GAL 12...
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
Noise/vibration information
EasyDrill 1200
Noise emission values determined according to
EN 62841-2-1 .
Typically, the A-weighted sound pressure level of the power
tool is less than 70 dB(A). The noise level when working can
exceed the volume stated.
Wear hearing protection!
EasyImpact 1200
Noise emission values determined according to
EN 62841-2-1 .
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
85 dB(A); sound power level
96 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
EasyDrill 1200 EasyImpact 1200
Vibration total values a
h
(triax vector sum) and uncertainty K determined according to EN 62841-2-1 .
Drilling in metal:
a
h
m/s
2
< 2.5 < 2.5
K m/s
2
1.5 1.5
Impact drilling into concrete:
a
h
m/s
2
– 20.0
K m/s
2
– 1.5
Screwdriving:
a
h
m/s
2
< 2.5 < 2.5
K m/s
2
1.5 1.5
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
Bosch Power Tools 1 609 92A 5HF | (18.12.2019)