Installation instructions
en
15
6.
Secure the appliance.
7.
Remove the protective film from the grease filters.
8.
Fit the grease filters.
To avoid causing damage, do not bend the grease
filters.
Establishing the exhaust air connection
1.
Screw the air outlet onto the housing.
2.
If required, fit the flue adapter onto the air outlet and
press firmly.
3.
Secure the exhaust pipe to the air pipe connector.
4.
Establish the connection to the exhaust air opening.
5.
Seal the joints.
Connecting to the power supply
1.
Insert the mains plug into the protective contact
socket.
2.
If a fixed connection is required, follow the instruc-
tions in the section
"Instructions for the electrical connection",
Fitting the flue duct
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp
edges.
▶
Wear protective gloves.
1.
Remove the protective foil from both flue duct sec-
tions.
2.
Fit the inner and outer flue within each other.
3.
Screw the inner flue onto both sides of the flue con-
nection plate.
Removing the appliance
1.
Disconnect the appliance from the power supply.
2.
Remove the flue duct.
3.
Loosen the exhaust pipe.
4.
Remove the grease filters.
To avoid causing damage, do not bend the grease
filters.
5.
Loosen the screws for the appliance bracket slightly
but do not undo them fully.
6.
Remove the appliance.
7.
Remove the flue connection plate.
