background image

5

Operation

These instructions apply to several appliance variants. It is 

possible that individual features are described which do not 

apply to your appliance.

Note: 

Switch on the extractor hood when you start cooking and 

switch it off again several minutes after you have finished 

cooking. This is the most effective way of removing the kitchen 

fumes.

Control panel

Control panel

Setting the fan

Switching on

Press button 1, 2 or 3.

Switching off

Press the 0 button.

Intensive setting

You can use the intensive setting if there is a large build-up of 

odours and fumes/vapours.
Press the 

˜

 button.

The run time is limited. The fan is then automatically reduced to 

a lower fan setting. You can switch back manually at any time.

Lighting

The lighting can be switched on and off independently of the 

ventilation.
Press the 

A

 button.

Cleaning and maintenance

Risk of burns!

The appliance will become hot during operation, especially 
near the bulbs. Allow the appliance to cool down before 
cleaning.

Risk of electric shock!

Penetrating moisture may result in an electric shock. Clean the 
appliance using a damp cloth only. Before cleaning, pull out the 
mains plug or switch off the circuit breaker in the fuse box.

Risk of electric shock!

Do not use any high-pressure cleaners or steam cleaners, 
which can result in an electric shock.

Risk of injury!

Components inside the appliance may have sharp edges. Wear 
protective gloves.

Cleaning agents

Observe the information in the table to ensure that the different 

surfaces are not damaged by using the wrong type of cleaning 

agent. Do not use

harsh or abrasive cleaning agents,

cleaning agents with a high concentration of alcohol,

hard scouring pads or sponges,

high-pressure cleaners or steam cleaners.

Wash new sponge cloths thoroughly before use.
Follow all instructions and warnings included with the cleaning 

agents.

Explanation

A

Light On/Off

0.1 Fan Off/Fan speed 1
2

Fan speed 2

3

Fan speed 3

Explanation

A

Light On/Off 

0

Fan off 

1

Fan speed 1

2

Fan speed 2

3

Fan speed 3

P

Intensive setting

3

Summary of Contents for DWA064W51B/01

















Reviews: