Bosch DUL62FA21, User Manual

Page: 6 / 12

6
Operating the appliance
These instructions apply to several appliance variants. It is
possible that individual features are described which do not
apply to your appliance.
Note:
Switch on the extractor hood when you start cooking and
switch it off again several minutes after you have finished
cooking. This is the most effective way of removing the kitchen
fumes.
Note:
Fold the glass cover forwards. This increases the
extraction area.
Control panel
Setting the fan
Note:
Always adjust the fan strength to meet current conditions.
If there is a large build-up of steam or fumes, select a high fan
setting.
Switching on
Set the slide control to position 1, 2 or 3.
Note:
When the fan is on, an LED is lit.
Switching off
Set the slide control to position 0.
Lighting
The lighting can be switched on and off independently of the
ventilation system.
Set the slide control to position 1.
Cleaning and maintenance
:
Risk of burns!
The appliance becomes hot during operation. Allow the
appliance to cool down before cleaning.
:
Risk of electric shock!
Penetrating moisture may result in an electric shock. Clean the
appliance using a damp cloth only. Before cleaning, unplug the
appliance from the mains or switch off the fuse in the fuse box.
:
Risk of electric shock!
Penetrating moisture may result in an electric shock. Do not
use high-pressure cleaners or steam cleaners.
:
Risk of injury!
Components inside the appliance may have sharp edges. Wear
protective gloves.
Cleaning agent
To ensure that the different surfaces are not damaged by using
the wrong cleaning agent, observe the information in the table.
Do not use:
■
Harsh or abrasive cleaning agents,
■
Cleaning agents with a high alcohol content,
■
Hard scouring pads or cleaning sponges,
■
High-pressure cleaners or steam cleaners.
Wash new sponge cloths thoroughly before use.
Follow all instructions and warnings included with the cleaning
agents.
1 Lighting
0 Switching off the lighting
1 Switching on the lighting
2 Fan
0 Switching off the fan
1 Switching on fan setting 1
2 Switching on fan setting 2
3 Switching on fan setting 3
Area Cleaning agent
Stainless steel Hot soapy water:
Clean using a dishcloth and then dry
with a soft cloth.
Always clean stainless steel surfaces in
the direction of the grain.
Special stainless steel cleaning prod-
ucts are available from our customer
service or from specialist retailers.
Apply a very thin layer of the cleaning
product with a soft cloth.
Painted surfaces Hot soapy water:
Clean using a damp dishcloth and then
dry with a soft cloth.
Do not use any stainless steel cleaners.
Aluminium and
plastic
Glass cleaner:
Clean with a soft cloth.
Glass Glass cleaner:
Clean with a soft cloth. Do not use a
glass scraper.
Control elements Hot soapy water:
Clean using a damp dishcloth and then
dry with a soft cloth.
Risk of electric shock caused by
penetrating moisture.
Risk of damage to the electronics from
penetrating moisture. Never clean
control elements with a wet cloth.
Do not use any stainless steel cleaners.