Bosch DSA-N2B40, Installation Instructions Manual

Page: 30 / 38

30 en | Monitoring and Maintenance DSDA Digital Storage Disk Arrays
- | V2 | 2009.11 Installation Guide Bosch Sicherheitssysteme GmbH
1. Upload the new software to a Web server
– If you are using VRM, place the file that contains the new version in
C:\Program
Files\Bosch\Video Recording Manager\VRM Server\web
on your VRM Server.
– If you are not using VRM, start a Web server tool, for example MiniWebServer.exe ,
select a root directory and copy the new software version into this root directory.
Example screen:
2. Download and install the new version on the storage controller hard disks:
Connect to the console of the storage device. To connect to the console, select Filer >
Use Command Line in the navigation panel of the FilerView administration interface.
– If you are using VRM:
On the console, enter
software install http://username:password@<VRM
Server IP>/<Filename>
Replace <
username
> and <
password
> with the login information of your VRM server.
Replace <
VRM Server IP
> with the IP address of your VRM server and <
Filename
>
with the name of the file that contains the new version.
Wait a few minutes for the installation to complete.
– If you are using MiniWebServer.exe :
On the console, enter
software install http://<MiniWebServer>/
<filename>
and replace <
filename
> with the name of the software update file.
Wait until the success message displays: Installation of setup.exe-7.xxx_e.exe
completed .
3. Download the new software to the CF card:
On the console, enter: download .
Wait until the success message displays: Operator requested download completed .
4. On the console, enter: halt .
The system reboots and stops at the bootloader.
Note that no data can be written on the disks while the system is rebooting.