14
Cleaning Maintenance and Repair
Test Run
Cleaning and Maintaining
Your Cooker Hood
After installation, clean the surface of the cooker hood.
Insert the electric plug of the cooker hood into the
receptacle. Test run operation is performed according
to "Operating Instruction".
Pull off the electric plug before cleaning or maintaining
the cooker hood.
Wear protection gloves when cleaning or maintaining
the cooker hood, to prevent injuring yourself.
DO NOT clean the cooker hood directly with water.
The cooker hood should be cleaned regularly
depending on the using frequency and surrounding
environment to keep a good exhausting effect and
have a longer service life.
Clean Filter Frame
Clean the metal grease filter at regular intervals. For
cleaning, a soft cloth can be used to clean the
external surface.
Clean the Inner Frame
A soft wet cloth is used instead of a hard object or
steel wire ball.
Clean the screen
Use neutral abradant-free detergents to clean the
surface of the outer shell.
Use a detergent special for glass to clean the glass
surface.
DO NOT use grinding sponge, sand cleaner, soda,
acid or chloride to clean the stainless steel surface.
DO NOT use any tool (e.g. steel wire ball) that may
easily damage the surface of cooker hood to wipe on
it.
DO NOT use industrial detergents to clean the cooker
hood.
Clean the filter layer
Unscrew the screws for fixing the filter screen, take
down the filter screen, and immerse it in water
containing a detergent for over ten minutes. Then,
wipe the inner filter screen with cloth.
Grease Filter Frame
Filter layer
Filter frame
Summary of Contents for DKS968D
Page 1: ...DKS968D Operating and Installation Manual for Cooker Hoods ...
Page 20: ......
