84
en | Advanced configuration
Divar 700 Series
F.01U.246.471 | v3.4 | 2011.06
Installation and Operation manual
Bosch Security Systems
Figure 6.15
Configuration menu - DirectIP text data
DirectIP allows external systems to send text data to the Divar unit for recording with one or
more cameras.
Click
Add
to define a new source system sending text data
1.
Enter the source IP address of the external system that sends the text data or 0.0.0.0 to
accept data from any external system.
2.
Select one of the TCP ports 7100-7131 on which to listen for text data.
3.
Select the codepage used by the source system to encode characters.
4.
Select the camera to store the text data with.
Click on an entry in the list and select
Settings
to review and update the configuration data of
the particular text source system.
Click on an entry in the list and select
Remove
to remove the selected text source system
from the list.
Text data coming from a text source system can be recorded with more than one camera. Use
Add
to associate the same source system IP address and codepage to a different destination
port and assigned camera. Similarly, use
Add
to associate more than one text source system
with the same camera.
