background image

44

en | Maintenance

DIVAR IP 7000 (2U)

2016.07 | V2 | DOC

Installation Manual

Bosch Sicherheitssysteme GmbH

1

2

1

DVD-ROM

2

Front port panel

To replace the front port panel:

1.

Turn off and unplug the unit.

2.

Remove the chassis cover.

3.

Disconnect the power and data cables from the front port panel to other chassis
components including the motherboard and backplane.

4.

Remove the old port panel by depressing the release tab, then pulling the unit out of the
chassis.

5.

Insert the new front port panel unit in the slot until the tab locks into place.

6.

Connect the data and power cables to the backplane and motherboard.

10.9

Installing the motherboard

Motherboard problems will be handled by trained support people only.

10.10

Installing the air shroud

The air shroud does not require screws for its installation.

Notice!

If a 16 DIMM (13.68" x 13") motherboard is used, it is necessary to use the optional
MCP-310-82502-0N air shroud.

To install the air shroud:

1.

Make sure that your air shroud matches your chassis model.

2.

Turn off the system and remove the cover.

3.

Place the air shroud in the chassis. The air shroud fits behind the two fans closest to the
power supply.

Summary of Contents for DIP-7180-00N





















































Reviews: