background image

24

en | OSS licenses

DIVAR IP 6000 (2U)

2016.03 | V2 | DOC

Quick Installation Guide

Bosch Sicherheitssysteme GmbH

(A) Copyright Grant - Subject to the terms of this license, including the license conditions and
limitations in section 3, each contributor grants you a non-exclusive, worldwide, royalty-free
copyright license to reproduce its contribution, prepare derivative works of its contribution,
and distribute its contribution or any derivative works that you create.
(B) Patent Grant - Subject to the terms of this license, including the license conditions and
limitations in section 3, each contributor grants you a non-exclusive, worldwide, royalty-free
license under its licensed patents to make, have made, use, sell, offer for sale, import, and/or
otherwise dispose of its contribution in the software or derivative works of the contribution in
the software.

3. Conditions and Limitations
(A) No Trademark License- This license does not grant you rights to use any contributors’
name, logo, or trademarks.
(B) If you bring a patent claim against any contributor over patents that you claim are
infringed by the software, your patent license from such contributor to the software ends
automatically.
(C) If you distribute any portion of the software, you must retain all copyright, patent,
trademark, and attribution notices that are present in the software.
(D) If you distribute any portion of the software in source code form, you may do so only
under this license by including a complete copy of this license with your distribution. If you
distribute any portion of the software in compiled or object code form, you may only do so
under a license that complies with this license.
(E) The software is licensed “as-is.” You bear the risk of using it. The contributors give no
express warranties, guarantees or conditions. You may have additional consumer rights under
your local laws which this license cannot change. To the extent permitted under your local
laws, the contributors exclude the implied warranties of merchantability, fitness for a
particular purpose and non-infringement.
(F) Platform Limitation - The licenses granted in sections 2(A) and 2(B) extend only to the
software or derivative works that you create that run on a Microsoft Windows operating
system product.

7.3

NTP License - NTP Project

component: NTP Project
url: http://support.ntp.org/bin/view/Main/WebHome
type: NTP License

***********************************************************************
Copyright (c) University of Delaware 1992-2012 *
Permission to use, copy, modify, and distribute this software and
its documentation for any purpose with or without fee is hereby
granted, provided that the above copyright notice appears in all
copies and that both the copyright notice and this permission
notice appear in supporting documentation, and that the name
University of Delaware not be used in advertising or publicity
pertaining to distribution of the software without specific,
written prior permission. The University of Delaware makes no
representations about the suitability this software for any
purpose. It is provided "as is" without express or implied
warranty.

Summary of Contents for DIP-6180-00N





























Reviews: