Dinion
XF
| Installation Manual
Bosch Security Systems | 2003-10 | V0.5
EN
| 21
Back Light Compensation (BLC) submenu
Selecting an area
To set-up an area for BLC (or VMD), access the area menu by selecting the
AREA option from the BLC (or VMD) menu. Upon entering the AREA
menu, the current area is displayed with the upper left corner flashing. The
flashing corner of the image can be moved with the Up, Down, Left, Right
arrow keys. Pressing the Select key moves the flashing cursor to the
opposite corner, which can now be moved. Pressing Select again freezes
the area and exits the area menu.
Video Motion Detection (VMD) submenu
BLUE gain
-5 - 0 - +5
• ATW mode and AWB hold mode: adjusts the B
gain to optimize around the white point.
RED
GREEN
BLUE
-50 - 0 - +50
Controls all the colors individually for manual
white balance only.
SAT
-15, … , 0 , … +5
Adjusts the color saturation. -15 will lead to a
monochrome image
EXIT
Return to MODE menu
Function
Selection
Description
BLC
ON, OFF
When ON, the video level is optimized for the
selected area of the image. Parts outside this area
may be underexposed or overexposed (this is
normal).
BLC LVL
-15,..0,..+15
BLC LEVEL adjust the balance between the
selected BLC area and its surrounding.
AREA
Select submenu
Select to access the Back Light Compensation
area menu (see selecting an area).
EXIT
Return to MODE menu
Function
Selection
Description
VMD
OFF, SIL, OSD
When VMD is enabled and the camera can
generate SIL (silent) or OSD (monitor alarm
generates on-screen message) motion alarms.
