27
Fitting the extractor hood
To a wall-hanging cupboard
50 cm
wide extractor hood:
With 4 screws.
90 cm
wide extractor hood:
With 6 screws.
163
60 cm
wide extractor hood:
With 4 screws.
163
1.
Dimensions for the mounting boreholes
can be found in, or place a template on
the base of the wall-
hanging cupboard.
2.
Mark the mounting holes and make pilot
holes with a bradawl.
In exhaust-air mode (upwards) mark the
exhaust-air opening and saw out.
❑
Consider the location of the
connection cable; if required, saw out
the cupboard.
3.
Remove the filter grille
(see Instructions for use).
4.
Screw the extractor hood to the base of
the cupboard.
163
560
898
30
Summary of Contents for DHU632PGB Installation Instructions
Page 107: ......
