23
Operating the extractor hood
Switching off:
There are 2 different methods of switching
off the appliance whether in manual or
automatic mode.
Switching off directly:
Press the
L
button.
Important:
All fan functions are switched
off.
Switching off appliance with fan run-on:
Insert filter drawer all the way. The fans
operate in the last switched-on stage for
around another 10 minutes and then switch
off.
❑
If the intensive setting is switched on
when the filter drawer is inserted, the
intensive setting automatically switches
back during run-on.
❑
If intermittent ventilation is switched on, it
continues operating normally following
run-on.
Light
❑
The light can be used at any time, even
when the appliance has been switched
off.
Switching on/off:
Press the
a
button.
Adjusting the brightness:
❑
Hold down the
a
button until the
desired brightness is obtained.
❑
After approx. 3 seconds the light
switches on to acknowledge the setting.
Switching off:
Repeat the process with the light switched
on.
❑
After approx. 3 seconds the light
switches off to acknowledge the setting.
Adjusting the sensitivity of the sensor
control:
1.
Press and
hold down
the automatic
button
.
2.
To display the current sensitivity, press
the
+
or
–
button.
3.
You can now change the sensitivity of
the sensor control by pressing the
+
or
–
button.
❑
Factory setting:
@
.
❑
Lowest setting:
{
.
❑
Highest setting:
Ö
.
Special functions
Switching on the light automatically, e.g.
via a timer:
❑
Fan and light must be switched off.
Switching on:
Simultaneously
press the
a
and
L
buttons.
