background image

8

Trouble shooting

Malfunctions often have simple explanations. Please read the 

following notes before calling the after-sales service.

Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be carried 
out and damaged power cables replaced by one of our trained 
after-sales technicians. If the appliance is defective, unplug the 
appliance from the mains or switch off the circuit breaker in the 
fuse box. Contact the after-sales service.

Fault table

After-sales service

Our after-sales service is there for you if your appliance needs 

to be repaired. We will always find the right solution in order to 

avoid unnecessary visits from a service technician.
When calling us, please give the product number (E no.) and 

the production number (FD no.) so that we can provide you with 

the correct advice. The rating plate with these numbers can be 

found inside the appliance (remove the metal mesh grease 

filter to gain access).
You can make a note of the numbers of your appliance and the 

telephone number of the after-sales service in the space below 

to save time should it be required.

Please be aware that a visit by an after-sales engineer will be 

charged if a problem turns out to be the result of operator error, 

even during the warranty period.
Please find the contact data of all countries in the enclosed 

customer service list.

To book an engineer visit and product advice

Rely on the professionalism of the manufacturer. You can 

therefore be sure that the repair is carried out by trained service 

technicians who carry original spare parts for your appliances.

Problem

Possible cause

Solution

The appliance does 

not work

The plug is not 

plugged into the 

mains

Connect the appli-

ance to the power 

supply

Power cut

Check whether 

other kitchen appli-

ances are working

The fuse is faulty

Check in the fuse 

box to make sure 

that the fuse for the 

appliance is in 

working order

The lighting does 

not work.

The bulbs are faulty. For information on 

changing the bulbs, 

see the "Replacing 

Bulbs" section.

E no.

FD no.

After-sales service

O

GB

0344 892 8979 

Calls charged at local or mobile rate.

IE

01450 2655 

0.03 € per minute at peak. Off peak 0.0088 € per 

minute.

Summary of Contents for DFO060W50













Reviews: