3
Bosch | 09/05 | 38685F
D7039
| Installation Guide | 2.0 Installation
2.0
Installation
Failure to follow the mounting instructions in this document can damage the FACP.
The D7039 and D7024 have static sensitive components and must be handled with care. Follow the
anti-static procedures when handling these modules.
Before installing the D7039 Module, remove all AC and battery power to the FACP.
1.
If the D7024 is already installed in an enclosure, remove it.
2. Place the FACP on a flat surface with the component side facing up (
Item 2
in
Figure 2
).
3. Insert the four plastic standoffs in the mounting holes (
Item 3
in
Figure 2
) without bending or flexing the FACP.
4. Align the standoff tabs so they do not touch the module components.
5. Firmly press the standoffs into the board, allowing the ears to expand out.
6. Mount the D7039 on the standoffs, ensuring the FACP connector pins (
Item 4
in
Figure 2
) are properly aligned.
7.
Install the FACP in the enclosure.
8. Use the mounting screw (
Item 5
in
Figure 2
) to secure the D7039’s ground wire (
Item 6
in
Figure 2)
to the FACP.
2
1
3
4 5 6
7 8 9
#
Cmnd
0
Prog
*
Clear
Disable
Drill
Test
History
Reset
Silence
Trouble
Silenced
Power
Alarm
1
2
6
3
4
3
5
1 - D7039 Module
4 - FACP connector pins to align with the D7039
2 - D7024 FACP
5 - Mounting screw
3 - Standoff mounting holes (4)
6 - Ground wire
Figure 2:
Mounting the D7039 on the D7024
