operation
en
17
operation
7 Basic operation
operation
7.1 Switching on the appli-
ance
1.
Electrically connect the appliance.
→
a
The appliance begins to cool.
2.
Set the required temperature.
→
7.2 Operating tips
¡
Once you have switched on the
appliance, the set temperature is
only reached after several hours.
Do not put any food in the appli-
ance until the set temperature has
been reached.
¡
The front and side panels of
the housing heat up occasionally.
This prevents condensation from
forming.
¡
When you close the door, a va-
cuum may be created. The door is
then difficult to open again. Wait a
moment until the vacuum is offset.
7.3 Switching off the appli-
ance
▶
Disconnect the appliance from the
power supply. Unplug the appli-
ance from the mains or switch off
the circuit breaker in the fuse box.
7.4 Setting the temperature
Setting the refrigerator
compartment temperature
▶
Press repeatedly until the tem-
perature display shows the re-
quired temperature.
The recommended temperature in
the refrigerator compartment is
4 °C.
Setting the freezer compartment
temperature
▶
Move the temperature controller
(freezer compartment) to the re-
quired position.
lowest temper-
ature
maximum tem-
perature
recommended
temperature
8 Additional functions
8.1 Super cooling
With Super cooling, the refrigerator
compartment cools as cold as pos-
sible.
Switch on Super cooling before pla-
cing large quantities of food.
Note:
When Super cooling is
switched on, increased noise may
occur.
Switching on Super cooling
▶
Press repeatedly until lights
up.
Note:
After approx. 2 hours, the ap-
pliance switches to normal operation.
Switching off Super cooling
▶
Press repeatedly until the tem-
perature display shows the re-
quired temperature.
