Connect S2 | Solar Frame
| User Guide
© Robert Bosch Manufacturing Solutions GmbH
Bosch Connected Industry
18 |
39
Mounting instructions for Solar Frame
CAUTION
The supplied mounting material (nuts, washers, etc.) is used to correctly mount the Solar Frame
and gateway.
Only use the supplied mounting material.
The flange nuts supplied are specially selected for mounting the Solar Frame and must only be
used ONCE. If the Solar Frame must be dismounted, always use new flange nuts.
Only use the flange nuts supplied
.
Use them only once. No multiple use
.
The solar cells in the Solar Frame can be damaged by a fall. It is solar glass.
Pay attention to safe handling when mounting the solar frame and avoid a fall of the Solar
Frame.
Replace a damaged Solar Frame.
TIP
It is recommended that you first plug the Solar Frame connector into the gateway and tighten it before
inserting the gateway into the Solar Frame.
