Connect S2 | Solar Frame
| User Guide
© Robert Bosch Manufacturing Solutions GmbH
Bosch Connected Industry
25 |
39
10
Technical data
Gateway Connect S2
4
Based on ambient tempe25°C and good mobile radio conditions. Depending on configuration, quantity of sensors and operating conditions.
5
The external voltage source used to operate the device must meet the requirements for LPS ("limited power source") according to IEC/EN 60950-1, section 2.5 or IEC/EN 62368-1, Annex
Q.
Dimensions (L x W x H)
136 mm x 69 mm x 36 mm
Weight
ca. 480 g
Power supply
Lithium Iron Phosphate (LiFePO
4
)
3.2 V
6.8 Ah
21.76 Wh
Battery life
1800 to 5000 Uploads
Localization
•
GNSS: Global Positioning System (GPS)
•
A-GPS: supported
•
Cell ID localization: Premium Cell Locate
Technology
IEEE 802.15.1
2.4 GHz
Protocol
Proprietary, RX only
Range
> 50 m free line of sight
Scan interval
configurable
Scan duration
configurable
Charging voltage
8 V to 24 V
⎓
(DC)
LPS required
Cable length max. 3m
Charge time
ca. 12 h to full charge
Data buffering capacity
> 200000 data sets
Maximum number of sensors in range
1500
Cellular Connectivity
•
2G GSM/GPRS
850 / 900 / 1800 / 1900 MHz
•
LTE Cat M1
(optional: Narrow Band IoT)
EU:
B3 / B8 / B20
USA / Kanada:
B2 / B4 / B5 / B12
SIM
Integrated SIM chip
RF output power
GSM850 / EGSM900
33 dBm
DCS1800 / PCS 1900
30 dBm
LTE-FDD B2 / B3 / B4 / B5 / B8 / B12 / B20
23 dBm
Housing material
PA6GF30
IP protection class
IP67 (with connector mounted)
