Conettix D6680
| Installation Instructions | 1.0 Introduction
1.2 Serial
Interface
1.0 Introduction
The Bosch Security Systems, Inc. Conettix D6680
Ethernet Network Adapter (referred to as the D6680) is
a two-channel network adapter. The D6680 includes a
cable for connecting to the DB25 Channel 1 Port. For
most networked installations, only one channel needs
to be used and configured.
Follow these instructions to avoid the
possibility of harm to the operator, or
damage to the program or equipment.
1.1 Network
Interface
Do not attempt to connect both Ethernet
ports simultaneously. The D6680 does not
have routing capabilities.
Figure 1:
Network Interface
1
2
3
4
5
1 -
10BASE-T Ethernet port (refer to Figure 2)
2 -
10BASE-FL Ethernet port (transmit) –
Not
Used
3 -
10BASE-FL Ethernet port (receive) –
Not
Used
4 -
Network LEDs
5 -
Power plug
Figure 2:
RJ-45 Ethernet Jack Pinouts
1
2
3
6
1 -
TX+
2 -
TX-
3 -
RX+
6 -
RX-
Figure 3:
Serial Interface
1
2
3
1 -
DB9 Serial port (DTE) – Not Used
2 -
Serial LEDs
3 -
DB25 Serial port (DCE) (refer to Figure 4)
Figure 4:
25-pin Serial Port
1
13
14
25
7
1
2
3
4
5
6
8
9
10
11
12
13
14
15
1 -
RS-232C
9 -
DCD (out)
2 -
TX+ (out)
*
10 - GND
3 -
TX – (out)
*
11 - DSR (out)
4 -
DTR + (in)
12 - CTS (out)
5 -
RX + (in)
*
6 -
RX – (in)
*
13 - RTS (in)
14 - RX (out)
15 - TX (in)
7 -
Reg +9-30 VDC
**
8 -
Reg +5 VDC
**
*
The minus sign (-) is sometimes represented as
A (such as TXA).
The plus sign (+) is sometimes represented as
B (such as TXB).
**
The device server can be powered up
alternately through the serial port and one of
these pins.
Bosch Security Systems, Inc. | 5/07 | 4998138732-01
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
4