Safety Precautions | 5
WARNING
6.
For all electrical work, follow all local and national wiring standards, regulations, and the Installation Manual. You must use an
independent circuit and single outlet to supply power. Do not connect other appliances to the same outlet. Insufficient
electrical capacity or defects in electrical work can cause electrical shock or fire.
7.
For all electrical work, use the specified cables. Connect cables tightly, and clamp them securely to prevent external forces
from damaging the terminal. Incorrect electrical connections can overheat and cause fire, and may also cause shock.
8.
All wiring must be properly arranged to ensure that the control board cover can close properly. If the control board cover is not
closed properly, it can lead to corrosion and cause the connection points on the terminal to heat up, catch fire, or cause
electrical shock.
9.
In certain functional environments, such as kitchens, server rooms, etc., the use of specially designed air-conditioning units is
highly recommended.
CAUTION
Do not install the unit in a location that may be exposed to combustible gas leaks. If combustible gas accumulates around the
unit, it may cause fire.
Do not operate your air conditioner in a wet room such as a bathroom or laundry room. Too much exposure to water can cause
electrical components to short circuit.
1.
The product must be properly grounded at the time of installation, or electrical shock may occur.
2.
Install drainage piping according to the instructions in this manual. Improper drainage may cause water damage to your home
and property.
Note about Fluorinated Gasses
1.
This air-conditioning unit contains fluorinated gasses. For specific information on the type of gas and the amount, please refer
to the relevant label on the unit itself.
2.
Installation, service, maintenance and repair of this unit must be performed by a certified technician.
3.
Product uninstallation and recycling must be performed by a certified technician.
4.
If the system has a leak-detection system installed, it must be checked for leaks at least every 12 months.
5.
When the unit is checked for leaks, correct and accurate record-keeping of all checks is strongly recommended.
Installation Manual
6 720 869 159 (2016/12)
