1 689 978 508
2011-12-03
|
Robert Bosch GmbH
Structure | CAM 847 | 23
en
9.
Connect the additional UI/UP PCB to the trigger
electronics using the supplied ribbon cables (x3).
458
823
_10
pa
Fig. 4:
Attaching the ribbon cables
10.
Remove both covers (see Fig. 1, Pos. 6 and 7) from
the housing. The covers are no longer needed.
11.
Install the two supplied connectors in the housing
with the code facing upwards.
458823_13p
a
X10
X9
X8
X7
X6
X5
Fig. 5:
Inserting the connectors
12.
Carefully push the trigger PCB (Fig. 6, Pos. 3) onto
the spacers in the housing.
458823_2
2pa
3
Fig. 6:
Installing the trigger PCB
13.
Fasten the trigger PCB using the fastening screw
(Fig. 1, Pos. 4) and washer (Fig. 1, Pos. 5).
14.
Plug all connecting cables into the PCB.
15.
Connect all cables to the additional UI/UP PCB.
458823_1
1pa
X10
X9
X8
X7
X6
X5
X4
X3
X2
X1
Fig. 7:
Plugging in the connectors
16.
Put on the cover.
17.
Secure the cover once more with the self-tapping
screws.
Summary of Contents for CAM 847
Page 2: ......
