MY20B01-22_1.0_21.06.2019
78
Operation
6.10.6 Switching on the display
Press the
On-Off button (display)
once.
The electric drive system is switched on.
6.10.7 Switching off the display
If the display is not inserted into the mount, it will
switch off automatically after one minute to save
energy if no button is pressed.
Press the
On-Off button (display)
once.
The electric drive system is switched off.
6.10.8 Using the push assist system
The push assist helps the rider to push the
pedelec. The speed can be a maximum of 6 km/h
in this case.
The tractive power of the push assist and its
speed can be influenced by the selection of gear.
To spare the drive, first gear is recommended for
travelling uphill.
The level of assistance OFF must not be selected.
Press the
push assist button
once to activate
the push assist.
Press and hold down the
plus button
on the
control panel within 3 seconds to switch on the
push assist.
Release the
plus button
on the control panel to
shut off the push assist. The push assist
system switches off automatically as soon as
the pedelec wheels are blocked or the speed
exceeds 6 km/h.
6.10.9 Using the riding light
The drive system needs to be already switched
on to turn on the
riding light
.
Press the
riding light button on the display
.
The front light and rear light are both switched
on (
riding light symbol
is displayed) or switched
off (
riding light symbol
is not displayed) at the
same time.
6.10.10 Selecting the level of assistance
You can adjust how strongly the electric drive
should assist you on the control panel when
pedalling. You can change the level of assistance
at any time, even when you are cycling.
Press the
plus button
on the control panel to
increase the level of assistance.
Press the
minus button
on the control panel to
reduce the level of assistance.
The motor power used appears on the screen.
The maximum motor power depends on the
selected level for assistance.
If the on-board computer is removed from its
mount (5), the last displayed level of
assistance is saved.
6.10.11 Operating the display
All user interface screens and texts on the
following pages correspond to the software's
release version. This means that there may be
slight changes to user interface screens and texts
if there are several updates to the software during
a year.
The display is operated using five buttons on the
control panel.
Figure 73: Control panel overview
Injury from pedals or wheels
The pedals and the drive wheel turn when the
push assist system is used. There is a risk of
injury if the pedelec wheels are not in contact with
the ground when the push assist system is used
(e.g. when carrying the pedelec up stairs or when
placing it on a bicycle rack).
Only use the push assist mode when pushing
the pedelec.
You must steer the pedelec securely with both
hands when using push assist.
Allow for enough freedom of movement for the
pedals.
CAUTION
!
1
2
3
4
5
6
Summary of Contents for Bulls Adventure Evo AM
Page 109: ...MY20B01 22_1 0_21 06 2019 108 Documents 11 4 Charger operating instructions H I H I H ...
Page 111: ...MY20B01 22_1 0_21 06 2019 110 Documents Compact Charger ...
Page 112: ...MY20B01 22_1 0_21 06 2019 111 Documents ...
Page 113: ...MY20B01 22_1 0_21 06 2019 112 Documents ...
