20
Changing the dust bag and filters
Replacing the dust bag
If the dust bag change indicator is completely yellow when the floor tool is
lifted from the floor and the highest suction power is selected, the dust
bag must be changed, even if it is not yet full. In this case it is essential to
change the dust bag due to the type of material it contains.
First check that the nozzle, suction pipe and flexible hose are not blocked,
as this would also lead to the dust bag change indicator being triggered.
Open the cover by moving the locking lever in the direction of the arrow.
Seal and remove the MEGAfilt
®
SuperTEX dust bag by pulling on the tab as
shown.
Place a new MEGAfilt
®
SuperTEX dust bag in the holder and close the dust
bag compartment lid.
Caution: The cover only closes when a MEGAfilt
®
SuperTEXdust bag
has been inserted.
9000 372 856 A 15.05.2008 16:42 Uhr Seite 20
