!
Attention: The dust bag change indicator only
works correctly in conjunction with a dust bag.
Open the lid by moving the locking lever in the
direction of the arrow.
Seal the dust bag by pulling the locking tab and then
remove it.
If the dust bag change indicator is completely yellow
when the floor tool is lifted from the floor and the
highest suction power is selected, the dust bag must
be changed, even though it may not yet be full. In this
case, a bag change is necessary due to the type of
material being collected. The nozzle, suction pipe and
flexible hose must not be blocked, as this causes the
dust bag change indicator to come on.
Slide the new dust bag into the holder to the stop.
Attention: The dust bag compartment lid will only
close when a dust bag or cloth filter or dust
collector is fitted.
Replacing the dust bag
Replacing the Hepa filter
If your vacuum cleaner is equipped with a Hepa filter,
this should be replaced once a year.
Open the vacuum cleaner lid.
Remove the Hepa filter from the guide.
Insert the new Hepa filter into the vacuum cleaner
and close the lid.
Replacing the dust bag
Always switch off the vacuum cleaner and disconnect the power cord from the mains
before cleaning the appliance.
The vacuum cleaner and plastic accessories can be cleaned with a commercial plastics
cleaner.
Do not use abrasive, glass or all-purpose cleaners.
Never immerse the vacuum cleaner in water.
The dust compartment can, if necessary, be cleaned with a second vacuum cleaner or
simply wiped with a dry cloth or a duster.
Subject to technical modifications.
Looking after your vacuum cleaner
