4
/24
BODAS controller RC/3x and RC/4x
| About this documentation
Bosch Rexroth AG, RE 95240-01-B/2021-01-12
1 About this documentation
1.1 Validity of the documentation
This documentation is valid for the following products:
• BODAS controller of series 3x and 4x
This documentation is intended for machine/system manufacturers, assemblers and
service engineers.
This documentation contains important information on the safe and proper
transport, installation, commissioning, operation, maintenance, disassembly and
simple troubleshooting of the product.
▶ Read this documentation completely, in particular chapter 2 "Safety instructions"
on page 7 and chapter 3 "General instructions on property damage and
product damage" on page 10 before you start working with the product.
1.2 Required and supplementary documentation
▶ Only commission the product if the documentation marked with the book symbol
is available to you and you have understood and observed it.
Table 1: Required and supplementary documentation
Title
Document number Document type
BODAS controller RC4-5, series 30
95205
Data sheet
BODAS controller RC28-14, RC20-10 and RC12-10,
series 30
95204
Data sheet
BODAS controller RC10-10, series 31
95206
Data sheet
BODAS controller RC5-6, series 40
95207
Data sheet
BODAS controller RC18-12 and RC27-18, series 40 95208
Data sheet
1.3 Representation of information
Uniform safety instructions, symbols, terms and abbreviations are used throughout
this documentation to ensure safe and proper use of the product. For clarification,
they are explained in the sections below.
1.3.1 Safety instructions
This documentation contains safety instructions in chapter 2.6 "Product-specific
safety instructions" on page 9 and in chapter 3 "General instructions on property
damage and product damage" on page 10, as well as before a sequence of actions
or an instruction for action involving a risk of personal injury and property damage.
Always follow the measures for danger prevention associated with the use of this
product.
