Installation instructions
en
21
¡
Cut-out work on the units should be carried
out before installing the appliance. Remove
any shavings. Otherwise, the correct opera-
tion of electrical components may be ad-
versely affected.
¡
Only a licensed professional may connect
appliances without plugs. Damage caused
by incorrect connection is not covered un-
der the warranty.
WARNING ‒ Risk of injury!
Parts that are accessible during installation
may have sharp edges and may lead to cut-
ting injuries.
▶
Wear protective gloves
WARNING ‒ Risk of fire!
It is dangerous to use an extended power
cord and non-approved adapters.
▶
Do not use extension cables or multiple
socket strips.
16.3 Electrical connection
In order to safely connect the appliance electrically, fol-
low these instructions.
WARNING ‒ Risk of electric shock!
Incorrect installation is dangerous.
▶
Only a qualified electrician may route the socket or
replace a power cable while taking into considera-
tion the applicable regulations.
▶
Connect the appliance only to a correctly installed,
earthed socket.
▶
If the plug is no longer accessible following installa-
tion, an all-pole isolating unit with a contact clear-
ance of at least 3 mm must be available on the in-
stallation side. Contact protection must be ensured
by the installation.
16.4 Installation in a wall unit
Observe the installation dimensions and the safety
clearances in an upper cabinet.
Only install 20 l appliances in a wall unit.
16.5 Installing in a tall cupboard
Observe the installation dimensions and the safety
clearances in a tall unit.
16.6 Preparing the 20 l appliance
1.
For a cabinet niche of 380
+2
mm in height, secure
the feet to the bottom of the microwave.
‒
Secure the spacer to the mounting bracket.
2.
Route the connecting cable along the back of the
appliance so that it does not become hot, kinked or
trapped.
Summary of Contents for BFL523M Series
Page 23: ......
