Bosch BE.7321.1M, User Manual And Installation Instructions

Page: 15 / 32

Time-setting options
en
15
12.1 Setting the cooking time
You can set a cooking time for operation with boost of
up to 30 minutes. You can set a cooking time for all
other settings of up to 90 minutes.
Requirement:
An operating mode and level have been
set.
1.
Press "Cooking time".
2.
To change the preset cooking time, press the relev-
ant time value, e.g. minute display "m" or second
display "s".
a The selected value is marked in blue.
3.
Use the setting ring to set the cooking time.
If required, use ​⁠ to reset the setting value.
4.
Press ​⁠.
5.
Use ​⁠ to start the operation.
Extending the cooking time
Once the cooking time has elapsed, you can continue
cooking the meal.
1.
Press "Continue cooking".
2.
Set the required cooking time.
→
"Setting the cooking time", Page 15
You can reset the set cooking time using ​⁠.
3. Press ​⁠.
4.
Use ​⁠ to start the operation.
Changing the cooking time
You can change the cooking time at any time.
1.
Press "Cooking time".
2.
To change the preset cooking time, press the relev-
ant time value, e.g. minute display "m" or second
display "s".
a
The selected value is marked in blue.
3.
Use the setting ring to set the cooking time.
If required, use ​⁠ to reset the setting value.
4.
Press ​⁠.
Cancelling the cooking time
You can cancel the cooking time at any time.
1.
Press the cooking time.
2.
Reset the cooking time using ​⁠.
For operating modes that always require a cooking
time, the appliance resets the cooking time to the
preset value.
3.
Press ​⁠.
12.2 Setting the end time
You can delay the time at which the cooking time for
the operation is due to end by up to 24 hours.
Notes
¡
To achieve good cooking results, do not delay the
time once the operation has already started.
¡
Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡
An operating mode and level have been set.
¡
A cooking time has been set.
1. Press "End".
2.
To change the preset end time, press the relevant
time value.
a
The selected value is marked in blue.
3. Use the setting ring to set the end time.
4.
Press ​⁠.
5.
Press ​⁠.
a The display shows the start time. The appliance is in
standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
a
When the cooking time has elapsed, a signal
sounds. A message appears on the display confirm-
ing that the operation has finished.
6. Once the cooking time has elapsed, perform one of
the following actions:
‒
If required, you can select other settings and re-
start the operation.
‒
When the food is ready, use ​⁠ to switch the ap-
pliance off.
Changing the end time
To achieve good cooking results, only change the set
time before the operation starts and before the cooking
time starts counting down.
1. Press "End".
2.
Use the setting ring to set the end time.
If required, use ​⁠ to reset the setting value.
3.
Press ​⁠.
Cancelling the end time
1.
Press "End".
2.
Reset the setting value with ​⁠.
3.
Press ​⁠.
12.3 Setting the timer
The timer runs independently during the operation. You
can set the timer for a time up to 24 hours. The timer
has its own signal so that you can tell whether it is the
timer or a cooking time that has elapsed.
1. Press ​⁠ .
2.
To set the timer, press the relevant time value on
the display, e.g. minute display "m" or second dis-
play "s".
a The selected value is marked in blue.
3.
Set the timer using the setting ring.
a If required, use ​⁠ to reset the setting value.
4.
To start the timer, press ​⁠.
a The timer counts down.
a
The timer remains visible on the display if the appli-
ance is switched off.
a
When the appliance is switched on, the display
shows the settings for the current operation. The
timer is displayed in the status display.
a Once the timer has elapsed, a signal sounds. A no-
tification appears on the display confirming that the
timer has finished.
Ending the timer
Requirement:
A signal sounds.
▶
Press any field.
a
The timer is switched off.
Changing the timer
You can change the timer at any time.
1.
If the timer is running in the background, use ​⁠ to
select the timer beforehand.
2.
Press ​⁠.
3.
Change the timer using the setting ring.