14
Operating Instructions
Priority
Burner on
Temp.
Bath Fill
Priority
Burner on
Temp.
Bath Fill
ON/OFF
Bath Fill
Volume
setting
Set Time
Press 2sec.
to set time
Main Controller
YPRM67XB
Clock Adjustment
1, 3
2
Adjust the clock
The time changes in 1-minute increments
with each press on the button, and
then in 10-minute increments if the
button is kept pressed down.
2
3
(Eg.: AM 10:15)
(Main Controller)
Press the Set
Time Button
1
Set Time
Set Time
Press 2sec.
to set time
Press the Set
Time Button
The clock function is only Main controller.
Increase
Decrease
Flashing
Priority
Burner on
Temp.
Bath Fill
Flashing
It changes to lighting from
flashing and the clock begins
to work.
Priority
Burner on
Temp.
Bath Fill
Flashing
•
The clock display will disappear if hot water is used or the temperature of the hot water is changed during
the clock display.
•
If the Time set button is pushed when the hot water is being used or high temperature (60
°
C and 75
°
C) is
set, the clock is displayed for 10 seconds and will return to the original screen display after that.
•
In the event of a power cut or after disconnecting the power supply, when the power is restored, the clock
on the display screen shows “0:00”, so the clock needs to be re-set.
Clock setting and the clock can be dis-
played regardless of “ON or OFF" of
the operation button.
(The illustration is in a state of "OFF".)
(Until “0:00” is flashing)
Display the clock
Press the set time button.
The clock display disappears when pushing again.
Set Time
Set Time
Press 2sec.
to set time
Set Time
Set Time
Press 2sec.
to set time
Summary of Contents for BC2600RA
Page 32: ...32 Operating Instructions Note ...
