Bosch BBS82, User Manual

Page: 21 / 160

Installing the appliance
en
21
Charging using the charging cable
→ Fig.
9
-
10
Charging in the base station
▶
Ensure that children do not play with the
appliance, even when it is in the base
station
1
.
→ Fig.
11
-
12
Charging using the quick charger
1
1.
Press the release button and remove the
battery to the rear.
→ Fig.
13
2.
Observe the enclosed instructions.
Installing the appliance
Installing the appliance
Installing the appliance → Fig.
14
-
15
Switching on the appliance
Switching on the appliance
Switching on the appliance
▶
Press ⁠.
→ Fig.
16
Setting the power
Setting the power
Setting the power → Fig.
17
-
18
Vacuuming with accessories
Vacuuming with accessories
Vacuuming with accessories → Fig.
19
-
20
Storing accessories
Storing accessories
Storing accessories → Fig.
21
-
22
Using the flexible extension hose
Using the flexible extension
hose
Using the flexible extension hose → Fig.
23
-
24
Cleaning the appliance
Cleaning the appliance
Cleaning the appliance
Requirement:
The appliance is switched
off.
1.
Disconnect the appliance from the char-
ging cable
1
.
2.
Clean the appliance and the accessory
with a soft cloth and a commercially
available plastic cleaner.
Emptying the dust container
Emptying the dust container
Emptying the dust container → Fig.
25
-
28
Cleaning the filter unit
Cleaning the filter unit
Cleaning the filter unit
▶
Never allow the filters to come into con-
tact with liquids.
→ Fig.
29
-
35
Cleaning the power brush
Cleaning the power brush
Cleaning the power brush → Fig.
36
-
38
Cleaning the power brush for hard floors
Cleaning the power brush for
hard floors
Cleaning the power brush for hard floors → Fig.
39
-
41
Troubleshooting
Troubleshooting
Troubleshooting You can rectify minor faults on your appli-
ance yourself. Read the troubleshooting in-
formation before contacting after-sales ser-
vice. This will avoid unnecessary costs.
▶
Repairs to the appliance should only be
carried out by trained specialist staff.
▶
Only use genuine spare parts when re-
pairing the appliance.
Malfunctions
Fault Cause Troubleshooting
The appliance is not working.
The battery status display does
not show any status.
The red fault indicator lights up
for 10 seconds.
The battery has not been inser-
ted correctly.
▶
Insert the battery correctly.
The battery has not been
charged.
▶
Charge the battery.
The battery has overheated or
overcooled.
1.
Switch off the appliance and discon-
nect the appliance from the power sup-
ply.
1
Depending on the appliance specifications