![Bosch B36CL NG Series Installation Instructions And Instructions For Use Download Page 20](http://html.mh-extra.com/html/bosch/b36cl-ng-series/b36cl-ng-series_installation-instructions-and-instructions-for-use_48616020.webp)
en-us
Operating the appliance
20
1
Operating the appliance
Operating the appliance
Switching the appliance on
1.
Press
ÿ
power
button.
The appliance begins to cool. The warning sound,
the flashing freezer
compartment temperature display and the
alarm off
button indicate that the freezer
compartment is still too warm.
2.
Press
alarm off
button.
The warning sound switches off.
3.
Set the required temperature.
"Setting the temperature" on page 20
Operating tips
■
When the appliance has been switched on, it may
take several hours until the set temperatures have
been reached. Do not put in any food until the
selected temperature has been reached.
■
The fully automatic NoFrost system ensures that
the appliance remains frost-free. Defrosting is not
required.
■
The front sides of the housing are partly heated
slightly. This prevents condensation in the area
of the door seal.
Switching off and disconnecting the
appliance
Switching off the appliance
■
Press
ÿ
power
button.
The appliance is no longer cooling.
Disconnecting the appliance
If you are not going to use the appliance for a long
period:
1.
Interrupt the water supply to the appliance.
2.
Take all food out of the appliance.
3.
Press
ÿ
power
button.
The appliance is no longer cooling.
4.
Pull out the power plug or switch off the fuse.
5.
Remove the water filter, empty the ice cube bin
and clean the appliance.
6.
Leave the doors and drawers of the appliance
open.
Setting the temperature unit
You can choose between the units °C and °F:
1.
Press
menu
button.
2.
Press
°C/°F
button.
3.
Press
Y
/
X
Settings button until settings display
shows
°C
or
°F
.
4.
Press
menu
button.
The setting is saved.
Setting the temperature
Recommended temperature
Cooling compartment
■
Keep pressing the
Y
/
X
button until the display
indicates the required temperature.
Freezer compartment
■
Keep pressing
Y
/
X
button until the display
indicates the required temperature.
Setting cool-fresh compartment
You can set the temperature and humidity of the
cool-fresh bin using pre-defined storage settings:
1.
Open refrigerator compartment doors.
2.
Press any button of the cool-fresh compartment
controls.
3.
Press and hold the
unlock
cool-fresh
compartment button until the light bar is fully
illuminated.
4.
Press the required storage setting button.
5.
Close refrigerator compartment doors.
The setting is saved.
Super cooling
Super cooling cools the refrigerator compartment as
cold as possible.
Switch on super cooling, e.g.:
■
Before placing large quantities of food into the
compartment
■
For cooling drinks quickly
Note:
When super cooling is switched on, increased
operating noises may occur.
After approx. 6 hours, the appliance switches to
normal operation.
Switch super cooling on/off:
■
Press
Û
super
button refrigerator compartment.
When super cooling is switched on, the button
lights up.
Refrigerator compartment:
37 °F (3 °C)
Cool-fresh compartment:
32 °F (0 °C)
Freezer compartment:
0 °F (–18 °C)