manualshive.com logo in svg

Bosch B3512, Owner'S Manual

Share
Download
Bosch B3512 Owner'S Manual Download Page 130

Part On status.
– Green. Ready to turn Part On.
– Red. Part On (part armed).

Power. The blue power plug indicates whether the
control panel has AC power.
– ON Steady. The AC (mains) power to the control

panel is present.

– Flashing. AC (mains) power to the control panel

is not present and the control panel is operating
from the battery.

– OFF. There is no power to the control panel.

Trouble. The yellow caution lights when a trouble
condition exists.
– ON Steady. There is a system, device, or point

trouble.

– OFF. There are no system, device, or point

troubles.

All On status.
– Green. Ready to turn All On.
– Red. All On (all armed).

130 en | B91x Keypad operation overview

Control Panels

2015.01 | 02 | F.01U.307.371

 

Bosch Security Systems, Inc.

Summary of Contents for B3512





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands