Bosch B18IF800SP, Installation Instructions Manual

Page: 9 / 84

en-us
9
Required accessories and tools
Supplied accessories
ʋ
Installation instructions
ʋ
Operating instructions
ʋ
Installation kit
Optional accessories
Freedom Heater Kit for Side-by-Side Installation
HEATKITB80
If the gap between the appliances is less
than 6" (160 mm).
Other required accessories
Ice maker installation kit
1
/
4
" OD copper line
For connecting appliances which require water, e.g. for
an ice maker.
Maximum outer diameter of the water pipe (without
fittings):
3
/
8
" (9.5 mm).
Miscellaneous
ʋ
Stepladder
ʋ
Dolly, hand truck
ʋ
Hammer drill for drilling holes in wall or floor
ʋ
Bits according suitable for material and in different
sizes
ʋ
Wooden beam (cross section min. 3" x 4") as an
alternative tip protection, length according to the
width of the installation niche
ʋ
Wooden screws in different sizes
ʋ
Thin plywood sheet, particle board or cardboard
to protect the floor from damage
ʋ
Suitable material for covering and protecting
furniture (e.g. protective sheets)
ʋ
Adhesive tape
Note:
Before using, check whether the removed adhesive
tape leaves adhesive residue on the work surfaces!
Otherwise do not use on high-quality work surfaces.
Tools
Cordless screwdriver
Torx bit T20 / T30 +
magnetic holder
Torx screwdriver T20
5
/
16
" (8 mm) hex nut driver
Wood drills in different sizes
Open end wrench
1
/
2
"
(SW 13 mm)
Multigrip pliers
Adjustable wrench
Cutter with adjustable blade
Metal tape measure, folding
rule
Square
Level, length 2' (60 cm) and
4' (1.2 m)
Level, min. 4' (1.2 m) long