30
Positioning of the
outdoor unit
❏
The outdoor unit can be set in any of the three
positions shown in figures 4, 5 and 6 as desired
depending on space conditions. Remember that
the outdoor unit must be placed on a horizontal
surface. Use the Support Plate accessory in
order to hang the outdoor unit from the hook it
comes supplied with.
Warning!
❏
Make sure that the appliance is hung in a
horizontal position, else the lower tray may
shed water. To do so, adjust the rear bar on
the outdoor unit.
❏
For safety reasons, never allow the outdoor
unit to hang solely from the duct that joins it
with the indoor unit.
❏
Do not set the outdoor unit higher than
permitted. Observe the minimun permitted
distances between the appliance and other
objects. See figure 7.
❏
Do not impede or twist the flexible duct that
joins the two units.
Preparations
4
5
6
mín. 0,5 m.
mín. 0,5 m.
máx. 3º
7
Summary of Contents for B1 RKM 15002
