background image

10

The air inside a room is circulated through a set of
purifying filters when the appliance is set to this
function.

The appliance comes with a main filter with a
double active purifying filter. This special filter is
for:

- Smells and smoke.
- Pollen, bacteria and dust.

Put the air expulsion duct in the same position as
for dehumidification.

Set purification speed setting:     maximum
or silent     .

When the appliance or the model is fitted with
optional filters, we recommend you leave the
optional filters in position regardless of the
desired function setting (cooling,
dehumidification, air purification). The appliance
purifies the air more efficiently in this way.

When set to     , the appliance removes humidity
from the atmosphere. It does not, however, control
the temperature.

Turn drainage stopcock 90° in an anti-clockwise
direction.

Remove stopcock plug and insert drainage pipe.
stored in the main filter compartment.

Place a bowl at the drainage pipe outlet to collect
the condensed water in.

Put the air extraction duct in storage position.

Set control knob to dehumidification position     .

The amount of water removed from the air can
reach as much as 30 liters/24 hours, depending
on atmospheric conditions.

Warning!

• Do not forget to put the plug back in place on

the drainage stopcock and to turn the
stopcock 90° in a clockwise direction before
setting the appliance to the temperature
control setting. The appliance will shed water
should you fail to do so. 

• Always remember that in order for the

dehumidification function to work properly,

ambient temperature must be at least 18°C.

Air purification

Dehumidification

Summary of Contents for B1 RKM 09004
















Reviews: