AVENAR panel
AVENAR panel series | en
13
Bosch Sicherheitssysteme GmbH
System manual
2022-07 | 5.0 | F.01U.378.910
Figure 2.2:
Overview of panel controller
Pos.
Designation
Function
A
Interfaces
Panel networking and inputs for internal device monitoring
B
Touchscreen
Operating the networked system through virtual buttons and variable display
windows
C
6 fixed buttons
Standard entries
D
Power button
Shutdown and restart of the device
E
Memory card slot
Memory card reader for maintenance services
F
Ethernet ports
Panel networking and interface to various systems
G
18 LEDs
Indicating the operating status
Networking
A panel controller with premium license can be networked with up to 32 panel controllers,
remote keypads and OPC servers.
Panels and keypads display all messages, or you can form a group of panels and keypads.
Within one group, only messages of this group are displayed.
Alarm indication
All messages are shown on the display with a bright color. The displayed messages contain the
following information:
–
Message type
–
Type of the triggering element
–
Description of the exact location of the triggering element
–
Logical zone and sub-address of the triggering element
At any time, the operator can request a status overview for each evacuation zone and each
output connected to the fire protection equipment.
18 Icon LEDs give continuous information about the operating status of the panel or the
system. A red icon LED shows an alarm. A blinking yellow icon LED shows a fault. A steady
yellow icon LED shows a disabled function. A green icon LED shows proper operation.
Two status LEDs, one red and one yellow, are programmable. The red one shows a self-
defined alarm. The yellow one shows a self-defined fault or deactivation.
