FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
Maintenance – history log | en
69
Bosch Sicherheitssysteme GmbH
User Guide
2020-07 | 3.0 | F.01U.378.877
16
Maintenance – history log
In the history log, all data about particular events or device types is stored sorted by date and
time. To display only particular data, filters can be set.
In addition to a menu overview, this chapter contains information about the following points:
–
–
–
–
Combining several filters, page 70
–
–
16.1
Selecting filters
The following filters are available:
Filter
Data, filtered by...
Without filter
All data
Show all Delete filter
Display all data with specification of event number, date,
time, element number and message type. Existing filters are
deleted.
Period
Starting date, end date and time
Event types
Message types, such as Fault
Device types
Device types, such as Detectors
Address range
Address range within a system
User commands
Selected function fields, such as
Acknowledge
or
Reset
.
Walktest
Elements switched to walktest mode
If one or more filters have been set, the
Change filter
field in the status bar is highlighted in a
dark color.
16.2
Setting filters
To display only particular data, a filter can be set.
Example:
To display only data that was stored in connection with a particular event, such as Fault:
1.
In the start menu, select
Maintenance
2.
History log
3.
Select the
Event types
filter.
A list of all event types is displayed.
4.
Select a list field, e.g.
Fault
.
In the status bar, the
Change filter
field has a black background. See also
5.
Select
Show in history log
.
A list of all fault messages is displayed. The events are sorted in ascending order by date
and time.
The fault messages are numbered chronologically. The leading number indicates the
sequence in which the fault messages were received.